Preferences

My Account

Shopping cart

Filters

Personal menu

Preferences

PrevGuide to Contingency Planni...

NextGuidelines for the Design, ...

Manufacturer: Witherby Seamanship

Guide to Manufacturing and Purchasing Hoses for Offshore Mooring

Be the first to review this product

Call for pricing

SKU: ISBN 9781905331888

Create ticket

This Guide, supersedes the 4th edition of the ’Guide to Purchasing, Manufacturing and Testing of Loading and Discharge Hoses for Offshore Moorings’, published in 1991, has been prepared by OCIMF with the purpose of providing technical recommendations and guidance to ensure the satisfactory performance of hoses commonly used at offshore moorings.
Although hose manufacturers may choose to continue to be guided by 4th edition until it is withdrawn in June 2012, this 5th edition reflects a major review and enhancement of the 4th edition for the purpose of providing technical recommendations and guidance to ensure the satisfactory performance of elastomer reinforced, smooth bore, oil suction and discharge hose commonly used at offshore moorings.

The following are among the new or significantly changed topics that are included in this latest edition:

• The guidance for Reeling Hose Systems are addressed for the first time with particular attention being given to the potential for hoses being subjected to crush loading

• a commentary comparing the design and operating guidance of ‘oil’ hose and hose specifically designed for

LPG is included to assist operators when considering hose used in the offshore transfer of LPG

• the Safe Working Loads guidance for hose lifting lugs have been re-assessed based on the weights of Double Carcass Hoses equipped with typical fittings

• the design specification for Double Carcass Hoses has been clarified, together with the guidance for leak detection

• acceptance tests include new guidance for material tests and the process for stiffness testing has been revised

• the circumstances that prompt prototype tests have been clarified and new tests addressing materials, torsion, tensile loading, crushing and lifting lugs have been introduced into the prototype test programme.

This programme now also includes guidance for the dynamic testing of prototype hoses.

Metric units are used for all dimensions including nominal diameter and standard length

Hoses constructed and tested in accordance with recommendations and guidance in this Guide may be stamped ‘GMPHOM 2009’.

GMPHOM 2009 consolidates:

* Guide to Purchasing, Manufacturing and Testing of Loading and Discharge Hoses for Offshore Moorings 4th Ed (Publ 1991)
* SPM Hose System Design Commentary (Publ 1993)

Note/. The recommendations and guidance within this Guide shall not be construed as establishing standards or requirements for application to offshore equipment.

OCIMF are not involved with any verification or quality control process relating to the manufacture and/or testing of hoses. OCIMF does not control or regulate in any way the stamping of ‘GMPHOM 2009’ on hoses and therefore, prospective purchasers are recommended to undertake a due diligence process to ensure that the hose specification is as claimed by the Manufacturer/Seller and that the specification is suitable for their intended application.